Big brands, low prices
Buy Now, Pay Later with Klarna
Huge stock of major brands
Next Day Delivery available*

Get 5% OFF this product with code VICFEB. Hurry, offer ends Feb 20th.

This product is currently not available.
Please inform me as soon as the product is available again.

Victron Energy 350W Solar Kit with Lithium battery KIT03

£1,035.12 RRP £1,087.52 (4.82 % )

Prices incl. VAT. excl. delivery costs

Sold out

FREE DELIVERY

Out of stock, contact us for lead time or a similar product recommendation

  • 70055
  • 36,50 kg
  • Low Prices Everyday
  • UK's Largest Stock
  • Next Day Delivery Available (Mon-Fri)*
  • Free Expert Advice 03331 885305
BEST BUY!
Victron Energy | 70055 Victron Energy | 70055
£1,099.00 RRP £1,128.42
Add to shopping cart
Victron Energy 350W Solar Kit with Lithium battery The kit includes the following part numbers...more

Victron Energy 350W Solar Kit with Lithium battery

The kit includes the following part numbers

  • SPM041751200 - 2 x 175W Solar panels
  • SCC110020160R - MPPT
  • SHU050150050 - SmartShunt
  • ASS000100000 - Sensor
  • ORI121236120 - Smart charger
  • 9880208 - Lithium battery

Solar panel specifications

  • Low voltage-temperature coefficient enhances high-temperature operation.
  • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
  • 25-Year limited warranty on power output and performance.
  • 5-Year limited warranty on materials and workmanship.
  • Sealed, waterproof, multi-functional junction box gives high level of safety.
  • High performance bypass diodes minimize the power drop caused by shade.
  • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high voltage operation.
  • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
  • Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
  • High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Brand: Victron Energy
Solar Kit Type: Off-Grid, Vehicle Conversion
Solar Panels Included: Yes
Solar Panel Type: Rigid
Panel Quantity: 2 x 175W
Solar Panel Dimensions: 1485 x 668 x 30mm
Solar Array Size: 350W
Required Roof Space: 2m²
Battery Included: Yes
Battery Capacity: 1280Wh
Portable Battery: No
Number of MPPT: 1
Downloads "Victron Energy 350W Solar Kit with Lithium battery KIT03"
Read, write and discuss reviews...more
Customer evaluation for "Victron Energy 350W Solar Kit with Lithium battery KIT03"
Write an evaluation
(Maximum number of files:3, Maximum file size (in MB):32, Allowed file extensions:jpg,png)
No files selected
Please enter these characters in the following text field.

The fields marked with * are required.

Victron Energy Solar Panel 175W - 12V Mono series 4a - SPM041751200 The Victron Energy 175W...

Victron Energy Solar Panel 175W - 12V Mono series 4a - SPM041751200

The Victron Energy 175W Solar Panel is a fixed solar panel that can be used for motorhomes, caravans, outbuildings and many other types of Solar applications.

  • Low voltage-temperature coefficient enhances high-temperature operation.
  • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
  • 25-Year limited warranty on power output and performance.
  • 5-Year limited warranty on materials and workmanship.
  • Sealed, waterproof, multi-functional junction box gives high level of safety.
  • High performance bypass diodes minimize the power drop caused by shade.
  • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high voltage operation.
  • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
  • Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
  • High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Q-Batteries lithium battery 12.8V 100Ah The Q-Batteries lithium battery 100Ah with lithium...

Q-Batteries lithium battery 12.8V 100Ah

The Q-Batteries lithium battery 100Ah with lithium iron phosphate technology (LiFePO4) is an extremely deep cycle and versatile battery. Compared to lead-acid batteries, lithium-ion batteries are significantly lighter and have a longer service life. Even under extreme conditions or incorrect use, there is no risk of explosion, as the innovative cell technology offers high operational reliability, long shelf life and large temperature ranges.

Key Features of the Q-Batteries 12-100 Lithium Battery 12.8V 100Ah:

  • Maintenance-Free
  • Extremely Cycle-Resistant
  • Very High Energy Density
  • Long Shelf Life
  • Low Weight
  • Compact Dimensions
  • Can Be Used In Any Position
Victron Energy Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC charger ORI121236120 The...

Victron Energy Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC charger ORI121236120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

Bluetooth Smart enabled

Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Fully programmable

Battery charge algorithm (configurable) or fixed output.

Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk – absorption – float

For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. 

For lithium batteries absorption time is fixed, default 2 hours.

Alternatively, a fixed output voltage can be chosen.

Remote on-off

A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

All models are short circuit proof and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

High temperature protected

The output current will reduce at high ambient temperature.

IP43 protection

When installed with the screw terminals oriented downwards.

Screw terminals

No special tools needed for installation.

Input fuse (not replaceable)

Victron Energy SmartShunt 500A/50mV - SHU050150050 The SmartShunt is an all in one battery...

Victron Energy SmartShunt 500A/50mV - SHU050150050

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

Differences compared to BMV712 Battery Monitor

  • No programmable visual and audible alarm.
  • No programmable relay.
Victron Energy Smart Solar MPPT 100/20 A solar charger gathers energy from your solar panels,...

Victron Energy Smart Solar MPPT 100/20

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

The intelligent Load output function prevents damage caused by running batteries flat. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't during periods of poor weather it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

VE.Direct

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a partially charged state and the end of discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Recently Viewed