Victron Energy Battery Monitor BMV-700 - BAM010700000

Victron Energy Battery Monitor BMV-700 - BAM010700000

The BMV-700 is Victron's new high precision multi-function battery monitor with a host of useful features. It essentially acts as a battery 'fuel gauge' for anyone needing to keep a check on the performance of their battery or battery bank. The information displayed by the BMV-700 includes voltage, current draw, Ah consumed, % charge level, 'time-to-go' and it features a programmable alarm and in-built relay to trigger external equipment under an alarm condition.

The shunt is fitted in-line with the battery's negative cable and the on-board PCB is powered by fused positive supply. Once the battery monitor is panel-mounted in a suitable location (with or without the supplied square bezel) it is connected to the shunt's PCB using a single RJ12 data/power cable and programmed using the on-board menu.

Features of the Victron Energy BMV-700 Battery Monitor:

• Displays: Voltage / Current / Power / Ah Consumed / State of Charge (%) / Time-to-go / Total kWh charged/discharged
• Auto re-calibration each time the battery is fully charged (to ensure accuracy is maintained)
• Auto-detection of nominal system voltage
• Programmable visual and audible alarm
• Programmable relay that can be energised/de-energised in an alarm condition
• Can be configured for use with other shunts
• Suitable for a single battery or a bank of batteries.
• Low current consumption
• Backlight for display
• Quick-install menu and detailed setup menu
• V.E Direct communication port for integration with other Victron equipment
• Suitable for use with 12V or 24V systems
• 5-year manufacturer's warranty

Box contents

• 1 x BMV-700
• 1 x 500A/50mV shunt with on-board PCB
• 1 x RJ12 cable - 10m long
• 1 x Fused power cable - 2m long
• 1 x Optional square bezel
• 1 x Fixings
• 1 x Instruction manual